http://www.veckfasteners.com Veck Fasteners offer immediate dispatch and a reliable service on a large range of fasteners for composites at prices that lead the competition. Contact us for a free quotation and samples. en-gb Veck Composite Fasteners Ltd Chris Barrett info@veckfasteners.com Chris Barrett chris@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT FeedEdit http://www.veckfasteners.com/links.html a list of composite-related and general purpose links. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/contact.html telephone: +44 (0)1305 257800 fax: +44 (0)1305 259420 email: info@veckfasteners.com write to: 8 Wyvern Buildings Grove Trading Estate Dorchester Dorset DT1 1ST U.K. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/ordering.html Payment information: paying by cheque: MAKE PAYABLE TO: VECK COMPOSITE FASTENERS LTD SEND TO: 8 WYVERN BUILDINGS, GROVE IND. EST. DORCHESTER, DORSET DT1 1ST. U.K. paying by credit card: we require the following details - TYPE OF CARD, CARDHOLDERS NAME, CARD NUMBER, VALID FROM DATE, EXPIRES END DATE, LAST 3-DIGIT SECURITY CODE ON SIGNATURE STRIP. A CHARGE OF 2.48% WILL BE APPLICABLE. For BACS, IBAN or Swift transfers, please contact us for the necessary account details. Chris Barrett info@veckfasteners.com Wed, 14 Jan 2009 15:43:56 GMT http://www.veckfasteners.com/distr.html Veck Fasteners directly distributes its products to a growing number of international customers. However, Veck also has an increasing number of distributors and please do not hesitate to contact us if you wish to discover the details of the distributor nearest you. Veck is actively engaged in forming an extensive distributor network throughout the EU. If you are a well-established distributor of composite materials or associated supplies and you recognise the potential benefits of promoting our bonding fasteners alongside your existing portfolio please contact us. We offer full marketing assistance along with all relevant training, as required. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/techinfo.html All fasteners are subjected to routine sample test procedures at each key stage of manufacture and also on completion. A pre-determined number of parts per batch are checked for dimensional accuracy against their relative drawing and then destructively tested to ensure that the weld is to the required standard (Fig. 1). A tensile force is applied and recorded at intervals of baseplate distortion (eg. 0.5mm elongation) and then a final pull-off value is taken. A batch is passed only if a consistant weld integrity rate results, as per our strict criteria. Although values vary, depending on the fastener size, the typical recommended torque value on a mid-range M1 (for example) is in the region of 13Nm and the tensile strength (at 0.50mm elongation) is approximately 4.50kN. Tolerences on all of our fasteners are +/-0.25mm (general) and 1.00mm on stud length. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/apps.html Veck bonding fasteners are now an integral item in many composite assemblies and the existing and potential composite manufacturers that use them are growing. A greater number of advantages are being found in composite material use as designers and manufacturers look at innovative alternatives over more traditional methods. Practically any composite assembly or sub-assembly that is not permanently bonded into place could potentially employ our fasteners. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/adh.html Veck Ltd are pleased to offer a family of structural acrylic adhesives which are ideally suited to range of applications including an increasingly popular methoid in which to attach its bonding fasteners. All of our products are available in a variety of packaging, including 50ml and 400ml Nylon dispensers with suitable application guns if required. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/specials.html In addition to our standard range of popular fasteners we provide purpose-designed products for individual customers. Please contact us if you have a special application that you wish to discuss. Non-standard parts will involve minimum order quantities and lead times that will depend on product design. Design proposals are usually of parts which are broadly similar to our existing range, in that they consist of a fastener or formed part welded to a baseplate. Base material must be Mild Steel (plated) or Stainless Steel (clean finish). A loop fastener on a Purchase orders for special parts will be subject to agreement to a detailed drawing and Veck are pleased to offer this service to customers where required. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/f2.html F2 female bonding fasteners are available in a variety of bush diameter, bush length and baseplate combinations. Please note that this information is for guidance only and you are advised to refer refer to our catalogue (available free on request) or to submit an enquiry to determine if a particular combination is within our standard range and in stock. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/f1.html F1 female bonding fasteners are available in a variety of nut size and baseplate combinations. Please note that this information is for guidance only and you are advised to refer refer to our catalogue (available free on request) or to submit an enquiry to determine if a particular combination is within our standard range and in stock. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/m4.html M4 male bonding fasteners are available in a variety of pin diameter, pin length and baseplate combinations. Please note that this information is for guidance only and you are advised to refer refer to our catalogue (available free on request) or to submit an enquiry to determine if a particular combination is within our standard range and in stock. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/m1.html M1 male bonding fasteners are available in a variety of stud diameter, stud length and baseplate combinations. Please note that this information is for guidance only and you are advised to refer refer to our catalogue (available free on request) or to submit an enquiry to determine if a particular combination is within our standard range and in stock. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/rotasys.html Veck uses its own unique part number identification system which allows us to determine which part number is relevant to your requirements and to match it to our existing range. What might appear at first to be a string of random letters and figures is in fact a logical system combining certain elements and dimensions to produce a very specific part number. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/prodnews.html Included in our standard range is a new 50mm diameter round base plate. This provides a much larger base to mount onto a substrate and is particularly useful where a larger fastener is required. This base plate is available with our M1 male threaded studs (sizes M6 to M10), F1 hexagonal nuts (M5 to M12) and F2 female threaded bushes (M6 to M12). Please contact us for further details. 15x15mm square (B15) 19mm round (B19 or S19) 23mm round (B23 or S23) 30x30mm square (B3030 or S3030) 38x15mm rectangular (B3815 or S3815) 38mm round (B38 or S38) 50mm round (B50 or S50) Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT http://www.veckfasteners.com/conews.html Much of 2008 was spent refining our manufacturing processes and as a result we are pleased to make available our new Price List which includes reductions on many items of up to 30%. Please contact us for a copy or a quotation. Chris Barrett info@veckfasteners.com Tue, 16 May 2006 08:55:50 GMT http://www.veckfasteners.com/index.html Welcome to the Veck Fasteners website - the leading bonding fastener manufacturer and international distributor. Our quality fasteners act as a dependable mechanical joining system, providing high load-distributing anchorages for various designs of composite or plastic mouldings as well as many other substrates requiring secure and reliable assembly. Veck fasteners can be applied to a variety of moulding processes including rotational, injection, composite layout, thermoforming and GRP. Other effective fixing techniques include thermal branding, welding, riveting or bolting. Chris Barrett info@veckfasteners.com Wed, 14 January 2009 08:53:03 GMT